Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. 2nd Gen - Drivetrain Discussions
    I‘m sure we are all accustomed to the stock exhaust on the Frontier. I noticed today that when I did a light rev on the truck, I noticed the noise in the video when I came off the gas. No unusual noise from the engine bay or when accelerating and no modifications. Anyone got any ideas?
  2. 2nd Gen - Drivetrain Discussions
    Long story short my truck sounds like a wet fart and is missing two cylinders. Questions, I see that some went with JBA exhaust etc.; but I’m wondering if you folks either used a Titan system cut down to fit, or a Frontier system and clocking the flanges? I’m trying to upgrade parts I can use...
  3. 1st Gen Hangout
    I may be in need of the pre-cat gasket where it bolts to the manifold for the 2.4. Does anyone know what that PN is or where to find it?
  4. 3rd Gen - Performance
    I’m fixing to purchase a magnaflow exhaust (can’t decide on muffler only or full system offered on Z1) but my question is; would any changes to the exhaust cause a dash light or need any kind of extra support or is it as easy as installing it and going?
  5. 3rd Generation General Discussion
    Has anyone installed a flowmaster muffler on their 3rd gen yet? I would like something that is a subtle rumble but not so loud that I’m “that guy” when driving around town if you know what I mean…. Any recommendations or information that might help the decision? Im not super interested in...
  6. 1st Gen Hangout
    So I bought a Nissan Frontier 2004, 3.3 V6 non supercharged. I’ve noticed that there’s a fair amount of white fumes coming from the exhaust and a pretty strong smell of gas. The other day I started it up and it was running really rough, not like it was misfiring but just skipping a beat. No...
  7. 1st Gen Hangout
    Hello. I ran into some weird problems yesterday and today. While I was driving I noticed a sulfur smell coming from my exhaust. My mind jumped to my catalytic converter going back and that I needed to go get it checked up on. However, driving today I noticed while idling with the AC on I would...
  8. 1st Gen Hangout
    Just today as I was backing up into a parking spot I noticed a sulfur smell coming from my exhaust when my foot was on the gas, that seems to be the only issue I can notice. I know this can be a sign of a bad catalytic converter but I was wondering if it could be anything else. I know I need to...
  9. 1st Gen Hangout
    I have a 2003 Frontier 3.3l SC 4x4 crew cab with the P0031 code still showing after I replaced the whole exhaust system and all the O2 sensors. This truck has some major rust from being in snow a lot. I am really puzzled. Does anyone know what could be causing this?
  10. 1st Gen Hangout
    so i have 2004 crew cab XE with the long bed and my exhaust is completely busted to the point one of the cats fell off on me while i was driving on the highway. (luckily i was able to pick it up) i was wondering if there is some where i would be able to get a whole replacement exhaust system...
  11. 1st Gen Hangout
    2002 Frontier V6 - Crew cab Several months back I had the muffler replaced and was informed I had a big leak at the exhaust manifold. I do, and it is noisy. I was quoted about $450 for the repair + $80 for each bolt that needed to be re-tapped. I hooked my shop vac to my exhaust and blew air...
  12. 2nd Gen - Exterior
    I stumbled across exhaust tips on Amazon when searching for truck accessories for my 2020 CC SV 4x4. Some claimed to deliver higher horsepower, some claimed to cure my gingivitis, & some claimed to posses resonating powers resulting in a deeper sounding exhaust growl. I figured, "This will be...
  13. 2nd Gen - Performance
    I’ve got a 2019 Pro 4X and I was going to put the Flowmaster 40 on but I don’t know which size tip I should go with. I’m looking for something that’s just a good sounding deep rumble. Nothing too loud or obnoxious. Thanks!
  14. General Discussion
    I have a exhaust leak but not sure where. I hear it close to the manifold does anyone have some advice on how to pinpoint where it’s leaking? I will be doing it myself and have read about taking off the manifold any tips to help it suck less? Thanks
1-14 of 14 Results