Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 2nd Gen - Lighting / Electrical / Wiring
    I have a 2016 Frontier that cranks but not start. A scan tool can not connect to the ECM to read any codes. I was told it is possibly the ECM. Can someone please tell me where I can find a wire diagram for the ECM and sensors. Thank you for all your help.
  2. 2nd Gen - Lighting / Electrical / Wiring
    I have a 2010 frontier se and run a decent amount of stereo equipment, however unfortunately tapped 12v to my frame and seem to have shorted something as now all it does is turn over. My question is, does the ecm have any sort of fail safe? Because I can’t find a single blown fuse and when I try...
  3. New Member Introductions
    Just Picked it up for 5k 4.0 75k . Here's where the questions come. It seems there is very limited technical service and nissan dealers are afraid of their rebranded truck. Here are my problems missing the ecm fuse box cover and the one next to it. Also the dash cluster lcd is out . The ecm has...
  4. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Is there a way to have the driver's side valet both up and down? I find it so aggravating that car-makers disallow the auto-up valet feature that was around for so many years. Now they have given us Auto-down bread crumbs in lieu of the old way... IF someone is aware of the proper way to do this...
  5. 1st Gen Hangout
    2004 Nissan frontier Xe crew cab vg33e automatic 4x4 that i have basically restored because we love it but, while in park it used to have REV LIMITER around 3500RPM you could hold foot to floor and it would just bounce off rev limiter until you let off gas peddle, Now that does not work, also...
1-5 of 5 Results