Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 26 Results
  1. 2nd Gen - DIY - Do It Yourself / Tech Tips
    I've seen a few different ways members have added onboard air to their truck. I wanted to come up with a way to not drill through the bed. In general I don't like any mods that can't be undone. I used some superstrut / unistrut after becoming familiar with it from the bedrails I saw lots of...
  2. 3rd Gen - DIY - Do It Yourself / Tech Tips
    I couldn’t find a visor organizer that didn’t interfere with the mirror on the back side, so I came up with this solution. Finished product is right below and I’ve included some quick visor removal instructions also… 1. Use a panel removal tool or small flathead and pop off the bolt cover...
  3. 2nd Gen - Interior
    Does anyone know where I can get this overhead molle panel for a Frontier? Or an affordable way to build it. I have access to a laser cutter and a cnc cutter.
  4. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Hey all! New member of Club Frontier and recent purchaser of a 2015 Nissan Frontier Pro-4X! I am loving the truck and have already done a few mods. I just got a new set of tires and wanted to protect the spare. This post is about my solution to the crappy cheap paper OEM tire protector that...
  5. 3rd Gen - Exterior
    Just finished applying 2 coats of Avalon Kings Armor Shield IX. This stuff is incredible! Easy to use, cost is reasonable, and the kit comes with everything you need...even some gloves...
  6. 2nd Gen - DIY - Do It Yourself / Tech Tips
    what's up ladles and jellybeans. I believe my transfer case has finally crapped out on me. some of the symptoms look like transmission issues but I already have a rebuild kit for that and know my way around a transmission fairly well. I've never cracked open a T-case though. for anyone that's...
  7. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Saw this video on YouTube where the guy takes a Coke can and pokes holes outlining the Coka-Cola then throws a LED inside and I thought why not.
  8. 20210926_183542_remastered.jpg

    Tinted the taillights Changed the brake and turn signals to led
  9. 20210926_183603_remastered.jpg

    Cut out the grill pieces Completely debadged
  10. 20210816_203340.jpg

    Installed underhood lights with hood pin
  11. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Alright after replacing the ac compressor, drier, expansion valve, and every o ring and putting in new refrigerant it worked perfectly the air blew cold, then after day 5 the ac blew less and less cold and eventually I started hearing a hissing noise coming from the passenger side glove...
  12. 2nd Gen - Lighting / Electrical / Wiring
    First of all does a 2016 2.5l even have a ac relay? I ask because my new compressor’s clutch is not engaging when I tired to recharge the system. The fuse is good next thing I went for is the relay but I couldn’t find it. Anyone know?
  13. 2nd Gen - Wheels, Tires, and Brakes
    I have a 2005 Frontier XE and today I started bleeding the brakes myself for the first time. I did not keep the master cylinder topped up the whole time which I know is a mistake so I stopped the brake bleeding job half way through. Only got the 2 rear tires bled. The pedal gets nice and firm...
  14. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Perhaps my first time posting? Not quite sure but anyways... I really really disliked the lack of lumbar support in my stock 2018 SV 4X4 seats and my lady really hated it too, so while scrolling the internet I found this quick tip on a corvette forum. Adding support to the springs behind the...
  15. 1st Gen Hangout
    Watching the video is how you more than beat the odds and ends.
  16. 2nd Gen - DIY - Do It Yourself / Tech Tips
    I have a 2012 Pro-4X crew cab (no parking sensors) that has a messed up bumper, so I'm trying to find a replacement. While I know there's lots of options out there to find a bumper without parking sensors, there's a local guy that has one with sensors for a good price, and I was wondering if I...
  17. 2nd Gen - DIY - Do It Yourself / Tech Tips
    I understand that a Softopper is not really secure, but has anyone come up with a way to at least deter someone that doesn't know how to use a Softopper (and that the sides unbutton/unzip). Looking for a way to secure the tailgate flap so to the untrained person if you lock the tailgate they...
  18. New Member Introductions
    I've got a 2019 Crew Cab SE. Other than the turning radius of the Queen Mary I really like this truck. I'm in Texas and plan on going out to the north end of South Padres island. I'm replacing the front bumper with an aluminum one being built by an FFA team to show at the San Antonio Rodeo &...
  19. 2nd Gen - Exterior
    https://www.amazon.com/dp/B08G8NRLZN/ref=cm_sw_r_cp_apa_i_fxsKFb45H87PW?_encoding=UTF8&psc=1 https://www.amazon.com/dp/B00W300LG8/ref=cm_sw_r_cp_apa_i_mzsKFbNV9JPAE?_encoding=UTF8&psc=1 Since they don't make a Prinsu rack for the Frontier, i searched far & wide for similar alternatives. I...
1-19 of 26 Results
Top