Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. 1st Gen Hangout
    Almost everything new or rebuilt. Getting some of the old stuff out was nightmarish. Found this bushing press on Amazon for $120. 20+ sleeves, 4 bolts with roller bearing washers. Worked on the rear lower control arm chassis bushing. Sleeves also fit and pressed new bearing races and seals...
  2. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Evening all, In addition to my other post about overheating, I did another job as well. The front axle had a humming noise for yrs. It wasn't too loud at low speed, but above 60 it got noisy if you knew what to listen for. It happened when going straight and turning left, but disappeared when...
1-2 of 2 Results