Nissan Frontier Forum banner
camber bolts
1-8 of 8 Results
  1. Suspension
    have a 2009 pro 4x with a 2.5 in lift kit. Didn’t install camber bolts when doing the lift and my front alignment has +1° of positive camber. First picture is wear on front tires and second pic is wear on rear tires. the front tires outer edges are wearing down very fast. Will camber bolts fix...
  2. Suspension
    ...a couple inches makes a world of difference. Result of Pathfinder V8 springs, Bilstein 5100s set to the first lift position (ie 2nd notch from the bottom), 25mm extended UCA ball joints, and camber bolts: Truck is sitting at the wheel well at 37.5" in back, 36.125" in front. This...
  3. Suspension
    Hello, I plan on lifting my 2016 frontier with the Bilstein 5100 set at 1.5inches. I was wondering if I do need to get adjustable cam bolts like the ones from PRG.
  4. Suspension
    Looking to do the rough country 2.5in lift but have then seen that I'll probably need new cam bolts in order to be able to get an alignment. I saw a number of older posts but no real difinitive solution as to which to buy, though what I gather is I should get OEM nissan cam bolts vs. aftermarket...
  5. 2nd Gen Frontier Builds
    Hey everyone, been reading this forum for awhile now but finally getting around to my post. I drive a stock 2007 Crew Cab SE, ~140K on the dash. I’ve been trying lately to find out if there would be ANY benefit or purpose to adding the eccentric bolt/washers to the suspension components BESIDES...
  6. Parts
    $70...These are brand new, unused, Front Alignment bolts/adjustable washers/nuts for Nissan Frontier/xterra/pathfinder 2005+. Bolts are for adjusting camber and caster if you ever get out of alignment or if you want to lift your vehicle, as the factory bolts aren't adjustable on most models...
  7. Parts
    I've got front and rear shocks with 34k on them, front camber bolts, and rear shackles and bolts. Put on a leveling kit and bilstein shocks right after I bought this truck. I dont want to throw them away. Offer what you want for any of the parts (like you had a shock go bad, snapped a shackle...
  8. Suspension
    I'm trying to get my 06' 4wd frontier's alignment up to snuff after a 2" lift. I got 3 out of 4 LCA camber bolts installed and of course the driver side rear oem LCA bolt is seized in the bushing so I would likely have to cut it out. My question is; can I achieve a proper alignment with...
1-8 of 8 Results
Top