Nissan Frontier Forum banner
brake
1-7 of 7 Results
  1. 2nd Gen - Suspension
    Hey guys, my 2005 nissan frontier 4x4 has started to "slip" forward when stopping and backward when accelerating. I have the PRG advanced coilover package installed for about 8 years now with no problems. My bilstein shocks are just recently brand new (since I thought they were the problem) and...
  2. 2nd Gen - Wheels, Tires, and Brakes
    Hi everyone, I have the 2010 crew cab LE and am about to change my pads, rotors, and a couple seized calipers. Also changing a sway bar Link. Wondering if anyone has the torque specs required for this job. Would be extremely appreciated. Can't seem to find the specs or service manual online...
  3. 2nd Gen - Lighting / Electrical / Wiring
    So the brake abs vdc off and slip lights all came on again for no apparent reason, brake fluid level full, clean battery terminals, all fluid levels topped off, reset the ecu, still nothing. This has happened about 6months ago and I tried everything then after about three days they went off and...
  4. 2nd Gen - Wheels, Tires, and Brakes
    I have had 4 sensors come on suddenly all at the same time. The SLIP, VDC off, ABS and BRAKE light have come on and won't turn off. I can turn the truck off and they turn off but as soon as I begin to move again, they come back on. I have a 2010 Nissan Frontier crew cab with approx 120K miles on...
  5. 2nd Gen - Wheels, Tires, and Brakes
    About a week ago, I replaced my brake pads and rotors on my 2015 SV. I have changed brakes many times in other vehicles, but this was my first time on my Frontier (I bought it used). Everything went fine except I did drop the caliper on the front left, but it wasn’t a hard drop and the brake...
  6. General Discussion
    2006 Frontier 4x4 4.0 it starts and idles almost perfect. If your not paying attention you might never hear it. You can peddle it in park or neutral to about 3500rpm. Put it in drive and put it to the floor. I thinks about spinning the tires but goes about 7 mph. You can peddle it to make it...
  7. 1st Gen Hangout
    I have an 01 King Cab and i noticed the other day that my third brake light was out. A few notes: 1. My main tail lights still function properly. 2. I have checked all the fuses that seemed to be associated with the brake lights. All are fine. 3. I pulled the third brake light off (LED...
1-7 of 7 Results
Top