Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 2nd Gen - Suspension
    Hi all, if you have an M205 differential with a titan swap this mod will save you a lot of time. Getting the axle shafts in typically requires you to remove the struts. If you clearance the plate on the bottom of the bump stock you'll have just enough room to get the axle in from below. If...
  2. 2nd Gen - Drivetrain Discussions
    Hello, I need to replace my rear axle seals. But trying to find the correct parts is somewhat unclear to me. Either there were posts for the C200 differential or posts with part numbers that don't seem to exist anymore :( Was looking for a rebuild kit that I could buy and found one on...
  3. Wanted
    Looking for some m226 axle shafts for my frontier with the m226 and elocker. Only really need the drivers side/left axle shaft but I would not turn down a set of both driver and passenger side. The drivers side is currently on national backorder it seems. Let me know what you have thanks...
    $100 USD
  4. OffRoad / 4x4
    I’m considering putting lockers on my 2007 SE 4X4. Do I need the M226 instead of the C200K axle? Or can I just get a locker for the axle I have now? I’m just wondering if there is any advantage/disadvantages of using the Nismo/Pro 4X setup.
1-4 of 4 Results