Nissan Frontier Forum banner
Showcase cover image for 07 Titan Swapped

General Information

Name
Project 07....
Year
2007
Titan swapped, Bilstein 5100's from 2017 Tundra set to lowest setting, TJM 1.6" Lift Springs Freedom UCA. Axles from Nisstec.Etc....

Modifications

Drivetrain
Stock
Interior
Leather Seats from 08 Pathfinder
Exterior
Stock
Lighting
Stock
Exhaust
MBRP
Wheel and Tire
15x12 w/35" Mickeys

Gallery

Comments

·
Registered
Joined
·
69 Posts
Nice...
 

·
Registered
Joined
·
2 Posts
Your truck is beautiful.
I just recently purchased a 2012 Frontier. It has a lift on it of at least 8 inches. I have a left front axle that needs to be replaced. Apparently the axle on the truck is longer than stock. The stock axle has a compressed length around 24”. The one on the the truck is between 30 and 31. How much of a lift do you have and did you need to get a different length front axle. If so do you have a part number so that I can possibly find the part I need?
 

·
Registered
Joined
·
2 Posts
Thanks Pj!! It took a lot of trial and error to get this lift figured out!! Out here in Hawaii there aren't to many Nissan guys lifting frontiers all we see here are a million tacomas with the same lift!!! so there was a lot of time spent trying different shock and spring combos.
As far as my lift height i am not really sure how much total lift I have, I know from the top of my tire to the center of the front fender is 17". The front axles that I am running is from Nisstec (N-TS-CV) for Titan swapped Frontiers running the 180 Diff and it was 345 before shipping so not bad of a deal.
 

·
Registered
Joined
·
386 Posts
Holy moly that thing is tall. I'm doing something similar, with a Rough Country kit and Tundra 6112s. I'm probably going to machine a couple lower spring perch notches for a little less lift than you. What extended brake lines did you use?
 
Top