Nissan Frontier Forum banner

Search results

1-20 of 69 Results
Advanced Search
  1. 2013 SV Trailer receptacle issue

    General Discussion
    I figured it out. I didn't realize that there was a second (smaller) fuse box under the hood that had a separate fuse (15 amp) for "trailer turn" - sure enough that one was blown and I replaced and I am back in business. I knew for a fact that my turn signals on previous trailer worked, but I...
  2. 2013 SV Trailer receptacle issue

    General Discussion
    I really think that it may have to do with a short that I may have cause while working in the trailer wiring. Is there another fuse somewhere other than the one under the hood that I should check?
  3. 2013 SV Trailer receptacle issue

    General Discussion
    No - I towed many of times before and all lights worked fine. Towed before with it, with all lights working
  4. 2013 SV Trailer receptacle issue

    General Discussion
    No - came from factory with it
  5. 2013 SV Trailer receptacle issue

    General Discussion
    Quick question: I tested the connections on my trailer receptacle and it looks like my tail light works fine, but my turn signals do not. I checked the one fuse under the hood that is labeled trailer and it appears to be fine. My next step was to take the receptacle itself apart, but I thought...
  6. Wheels/tires, Spindles, LCAs, Skid Plate

    Parts
    still available
  7. Radflo Extended Coilovers

    Parts
    I'm at 21673, but could meet you in Annapolis. At this point I don't think they'll last very much longer though.
  8. Radflo Extended Coilovers

    Parts
    bump
  9. Wheels/tires, Spindles, LCAs, Skid Plate

    Parts
    Just installed the Fabtech kit on my '13 CC, 4x4. All these stock/OEM parts came off the truck with 52,000 on it. Located in 21673. 4 wheels/tires - $300 2 spindles - $150 2 LCAs - $125 1 skid plate - $75 All in good, undamaged condition. PM me for more pics or offers - you pay shipping and...
  10. Radflo Extended Coilovers

    Parts
    Here are some additional pics since folks have been asking. Got them back from the installer today and just took them. Please let me know if you'd like any other pics or measurements.
  11. Fabtech installed with 35" tires

    Suspension
    Ok - great. Thank you. I'll take a look this weekend.
  12. Fabtech installed with 35" tires

    Suspension
    Would I still be able to remove the sway bar without having the extended coilovers and just the stock shocks with the funky FBT extensions on it?
  13. Radflo Extended Coilovers

    Parts
    Radflo Adjustable Coilovers SOLD I just recently bought a set of used, rebuilt Radflo Coilovers to use with my Fabtech lift kit, but they do not work with that lift. Here is what I was told: Radflo 2.0 adjustable height coilovers with extended travel settings and 650# spring rate; can...
  14. Shop recommendation Eastern Shore MD /DE

    Mid-Atlantic
    I actually found a good shop here on the shore that did install the lift for me. They are our of Preston, MD. It's not their main business, but they do nothing but lift kit installations. PM me if you want the contact info.
  15. Fabtech installed with 35" tires

    Suspension
    You are correct. I did have to trim and still do have to trim quite a bit more than just the pinch weld area. I will take pics this weekend. Lots more trimming towards the front bumper - there truly isn't much plastic left now.
  16. Fabtech installed with 35" tires

    Suspension
    You got that right!! I wonder how to cover all the openings up after all that stuff has been cut out?! Thank you! What size wheels/tires do you run?
  17. Fabtech installed with 35" tires

    Suspension
    Here you go. Got the truck back today. I'm still trimming a bit more in the front to clear the 35" tire. Wheels are 17x8 with 4.5" backspace, tires General Grabber 305/70/17.
  18. Alignment Instructions to Give to Your Tech (via Brutal & nismo4x)

    Suspension
    Dropped my truck off for the alignment today after the Fabtech kit install with 35" tires. I left this document for the technician. I didn't get to talk to him, but I have attached the data I received. Please let me know your thoughts.
1-20 of 69 Results
Top