Nissan Frontier Forum banner
invasion08

Reaction score
118

Profile posts Latest activity Discussions Media Albums About

  • Racksaw ·
    It is not level right now, and I do not know how much settling will occur. My lowest measurement has been 36 inches from ground to center fender on front, and 37.5 inches on rear. I've read Pathung's build thread and noticed he has the same setup with 1.5 inch spacers on the front but I cannot remember reading whether or not he is level. He also has a lot more armor than I do as I have nothing else done to my truck.
    Racksaw ·
    I have added an album to my profile with pictures of the lift and control arms. If you have any specific questions about it let me know.
    Racksaw ·
    Yes, I did OME medium duty lift front and rear and SPC upper control arms. I can take pictures Monday morning after work (let me know if you would like specific items). The driver side UCA rear bolt was a pain, but I separated the steering linkage and imposed some will to get it out. I installed it from the other side so it shouldn't be a problem in the future. If you haven't bought the kit already and the option shows assembled struts for the front I would recommend them unless you have access to a shop to get them assembled. Taking them somewhere leaves you open to misaligning the coil on the shock (there is a post about OME kit installs and has a great picture that I referenced to get mine assembled to put on). The UCA setting is something of pure preference. I read the sheet that comes with it and I have mine set on setting D (I will provide a picture of this too) which gave me around one degree of positive camber.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top