WRP pulley causes problems for Titan

[Blaze_tylr]

Seems to me that if I and members spent what ,250 or something like that for the CP then they EACH should get balanced one by one and the balancer reset after each one .Now back to point has anyone with on of these on a FRONTIER had problems ? I have one , only thing I know it has done was kill my voltage at idel .But thats not a problem per say .



This dosen't need to turn into a ***** fest and lets no go loking for a fight .WRP made us a lot of " Shiney " parts and we took the bait .Some worked and others got stuck ,long and hard .Thats over with so far but whos to say whats going to happen with in the next few days/weeks/months .? If we face the same problems the titan guys are haveing then we need to watch out ! If we have a problem with something as simple as a gasket and it last's for months whats the out come if something like this happens to your engine ?



Also im not one to flame anyone ,Well not out right mostly for fun .But the people who LOVE WRP and the trolls for him due us a favor and stop posting here .Be like drew and just stop .Were all so happy that everyone is gone .Have a nice day stay black

[agtitan06]

FYI, this was posted by a respected vendor on ClubTitan:

Originally Posted by jerseyparts

I can't take it anymore, it is slime like this that gives good businesses a bad name.

All you folks who ordered any item from this guy, you do have recourse, since he does show a business in NJ, he is governed by the NJ Attorney Generals Office, and believe me They will investigate this guy to the nth degree.

If you purchased from out of state, you have even more rights that a NJ Citizen, I suggest you file a complaint at this url:
How to File a Complaint with the New Jersey Division of Consumer Affairs

and then contact the NJ AG and follow up, you would be surprised what they will make him do.
They will seize any assets in the business's name, or in his Name if he is Not a Limited Liability Company.

You will need to file a complaint, you will not be required to come to NJ, Unless the Attorney General determines that a Grand Jury Trial is warranted.

I am sorry to jump in here, where I don't belong, but I was getting sick to my stomache reading how this guy is running a sham of a Business.

JP

[Mainerunr]

Originally Posted by dubie2003

Exactly but what says Will doesn't have plans on getting new ones to them? I know it has been time but the same for the IMS, it took time for the replacement gaskets. It is just his MO, it takes time for the replacements to come out. Probably due to his cash flow, not everyone has the money just laying around for 15 pulleys to be machined at once.

if I'm a paying customer, it's irrelevant to me what his financial situation is, if a part is not as advertised, it needs to be corrected in a timely fashion. Will does not do this. Based on the fact that his initial reaction seems to always be 'blame the customer' first, it makes it real easy to question his intentions.

The way he operates is exactly what comes to mind with the phrase 'fly by night operation'.

I dont know if it's his intention to rip people off or if he's just an idiot when it comes to business but it is obvious that he takes the easy way out and doesnt bother with any real testing.

You can give him the benefit of the doubt but he's proven to me that it just isnt worth doing business with him.

[toyniss]

Originally Posted by agtitan06

Toomnymods doesn't have the pulley, and he races his Titan more than anyone else...no broken flex plate.

And, hmm...who is the target market for the pulley...duh, people who race...so that is a sorry excuse from Will to say that oh, it's because you race. duh, everyone who has his pulley races...that's why they bought the pulley.

thanks for pointing that out, i was about to say there has to be someone over there at clubtitan with cp and doesnt race with broken flex plate. only time will tell! either way doesnt exempt you know who from all the shadyness.

Originally Posted by Mainerunr

I think some of you are missing the other half of the issue over there...the underdriven PS pulleys that are stock diameter, that Will has admitted are not what he said they would be, that Will has not replaced, that Will changed the website to delete the underdriven notation but left everything else the same (how is it that a stock diameter pulley will have the same power gain as an underdriven one? And could it be that he plans to clean up the ones returned to him and sell them again as new...assuming he ever gets around to replacing them with the product he had advertised).

You can defend him all you want, the guy is scum. Sure, the IMS produces power for our application but the guy has zero business sense and reverts to the same argument regardless of where he is and what he is defending (blame the user, threaten legal action for libel, slander, etc.).

Seriously, reading that thread was like having a flashback to CF 2 months ago.

x2. there are still customers that have yet to get a product after paying months ago.

and just so you guys know will/wrp has yet to come through and satisfy everyone from gb3! hes not getting the factory gaskets back from me without sending me a new gasket and some money back since i damn well know it doesnt cost 60 bucks to make those new gaskets.
and as some have pointed out if he would act like a real business person should it would have never escalated to this point!

[Sly Tuna]

Wow... A lot to read... I was hoping to get to sleep early tonight... So based on everyones knowledge, should i leave my WRP on? Or switch it to stock...

[thebrandon]

that should be a pretty clear decision if you read any of that

[Mainerunr]

Originally Posted by dubie2003

I agree, you should always have the cash-flow to do it but he decided to go out on a limb and play a tricky game. I guess he failed but if he ever does fix the PS issue, then it is only the CP that would be in focus. He might even be able to recoupe some of the cost by selling the lightweight Titan (actual underdriven Frontier) PS pulleys "used". Make it half price and I am sure someone will buy it. Well, maybe not on CF but possilbe FB or Ebay.

Yeah, he plays a tricky game, the fact that he pretty much only sells through group buys tells you that he doesnt operate as a business would. He gets a batch made, pays the bill and pockets the rest, I'd guess the IRS has never heard of WRP Technologies. A 'normal' business has cash on hand to handle incidentals and to cover things like faulty parts, etc. Since he only does group buys and always claims he needs to put off fixing things until the next group buy, it tells you that he not only has no clue about customer service, he has no clue how to run a business. If I were the 'university' that is posted on whatever profile of his is posted in that thread over on CT, I'd demand that he remove all reference to them because he certainly makes them look bad.