Nissan Frontier Forum banner

2014 pro 4x lift kit

3K views 5 replies 4 participants last post by  jjs34748 
#1 · (Edited)
So im probably gonna sound stupid, but after ordering my leveling kit and looking at the strut mounts, it looks damn near impossible to get a wrench up in there to undo everything. anyone got any advice?
 
#4 ·
Make sure you have a good breaker bar, the lower bolt on the shocks is a bear to get loose. My truck is only 4 years old and I actually broke my breaker bar doing this exact job.

BTW, if you are like me you will look at it and wonder if you can get away with out pulling the shock completely off. Well you cant, the upper block requires you to turn the shock 180 degrees to re mount to the top.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top