Mustard's 05 SE CC 6-speed

[mustard23]

grenaded a CV. rebuilt the other CV, burnt a clutch tore up wiring harness, broken ABS line, bent a spindle, and blew an AC blower motor, guess they don't work when filled with sand.

I need to bug my builder for pics..

[mustard23]

update from builder..

Originally Posted by NODNARB

front sheetmetal is all gone, interior is stripped, a-pillars are kinda mocked in, a/c will be kept.
getting the rearend fit up, wishbone is mainly 1.75"x.120 wall w/ a couple pcs. of 1.5"x.120 wall DOM
lower links are 2" x .250 wall DOM. they should be pretty bash-proof

[mike]

Will you be using stock titan half shaft?

[nizmut]

I doubt that, I would guess at least 3 inches wider.

[roastbeef]

single shear heims for the lowers? or are you not done yet?

[mustard23]

Originally Posted by mike

Will you be using stock titan half shaft?

nope new axle, and 930 CVs.

Originally Posted by nizmut

I doubt that, I would guess at least 3 inches wider.

yeah will be 5.5 to 6 inch over.

Originally Posted by roastbeef

single shear heims for the lowers? or are you not done yet?

It's far from done it's still in the mock up and cycle stage.

[mustard23]

the PRG kit that is out is 5.5 over a side and that was what Fiberwerx used to make there front clip.


and todays update tires.. I'm getting some Nitto Terra Grappler... trading some parts for them.

[AlMeRicK]

wich brand are those uca and lca?

[mustard23]

SLR but he is out of business. My builder is making new ones that will be available in a kit that will be 5.5-6" over per side.

[NISLO]

the lower bars mounted on the outside of frame rails gives me an idea. you gonna run a fuel cell in the bed? looks like the tank won't fit anymore because of wishbone.