tc uca's

[peter]

Originally Posted by Tommo

Hey Pete, I think Nav is trying to say "learn from someone else's experience".
Is there a particular reason to use a Koni shock, or is that what they sell? Sounds simple enough for sure, just as long as the heat from the welding doesn't do anything it shouldn't!!!!
Is the ball joint in the TC UCA sealed at the top? They have probably figured out the wear factor, but it would be good to see either a boot or seal/scraper on there. Would really finish it off!
When is it all going on then???????? Pull the finger out Pete! Are you waitng for a decent strut, or will you try it with the standard strut?

Hi there Tommo, your are correct thats what they sell ,the welding is not a problem as the fabbed part is welded off of the shock and it remains removable. The ball joint is open on both sides but I don't think water could even get in there. As for the fitting I just have to take my truck to the dealer to replace the rear brake drums and wheel bearings (under warranty) then the kit goes on I just don't want to have to explain sht to them you know how some dealers can be. Oh forgot, will install with a new strut, it just takes a day or two to do the new mod.

As far as my reply to navara-au is concerend, what I mean is that by trying stuff out on your truck you don't do any damage, if a part does not seem to work how you thought it would you just take it off and bin it, lesson learned. Nav If you read this, sorry, not meant to sound aggressive.
Regards
Peter

[navara-au]

Originally Posted by peter

Nav If you read this, sorry, not meant to sound aggressive.
Regards
Peter

Pwedta! pwedta! pwedta! u The Man

You couldnt be agressive if you tried mate. I was just having a dig at you

I am really looking forward to seeing what it looks like after the install.

Thanks for the part No. for the rancho's because most parts people dont have any cataloges with D40 parts if you have a part No. it helps. I will like the No. for the front to when you get around to it.
Hope to go to Moreton Is as soon as the weather warms up.

[peter]

Originally Posted by navara-au

Pwedta! pwedta! pwedta! u The Man

You couldnt be agressive if you tried mate. I was just having a dig at you

I am really looking forward to seeing what it looks like after the install.

Thanks for the part No. for the rancho's because most parts people dont have any cataloges with D40 parts if you have a part No. it helps. I will like the No. for the front to when you get around to it.
Hope to go to Moreton Is as soon as the weather warms up.

Good on ya bud enjoy.
Regards
Peter

[Tommo]

Originally Posted by navara-au

Pwedta! pwedta! pwedta!

Is that Pwedta as in Eric Bana's character in the comedy company!!!??? Grow a mullet Pete, and suck back on some Winny Reds mate!!! Oh and don't forget the VB horse piss in your esky too!

[navara-au]

Haven't you seen pwedta's photo yet Tommo?

[Tommo]

Originally Posted by navara-au

Haven't you seen pwedta's photo yet Tommo?

I just had to pick myself up off the floor!! Man I'm crying here!!! That is f$#%!!'n hillarious!!!! Can't wait to see Pwedtas' response to that!! Oh **** my guts are aching from laughing!!!!!

[navara-au]

Sorry Pwedta.......Tommo put me up to it (the conniving bastard)

But the mullet does suit you mate

Dont worry i wont give up my day job and become a graphic designer.LOL

[peter]

Originally Posted by navara-au

Haven't you seen pwedta's photo yet Tommo?

the hair style suits me, think I'll grow it
But the joint is real cool man I'm going to light another and chill with a VB.
Regards
Peter

[Tommo]

Originally Posted by peter

the hair style suits me, think I'll grow it
But the joint is real cool man I'm going to light another and chill with a VB.
Regards
Peter

It's a Winny Red Pwedta! Man Nav did a real good job on that pic. Probably took him hours, or days.....
No I didn't put Nav up to it!!!! But I did compliment him on his fine artistry, waisted talent I say!

[BIG ZETOR]

Do you guys reckon they might make something simalar to the tc uca's over here like snake racing or 3rds productions maybe, Are you guys thinking about geting some tc uca's because if you are maybe we can get them all at the same time' just a thought.