i have a 5 inch calmini, and i orderd the titan swap. but my question was does anyone know if thats going to make me taller? i think it would but i dont know. i was hopping maybe two inches. but idk i dont have much info on the titan swap.
any help would be amazing thanks guys
Yep, you can even get the custom shafts to make everything work if you are 4x4.
I do agree with bwarren, I asked this question a while back about adding a titan swap to get a little more lift and my understanding was that it didn't add any just widened the front and made for better steering and articulation.
__________________ '05 EB CC NISMO 4X4 MODs-Nissan toolbox-PRGproducts. com 3in lift with T\C arms, radflos and Deavers,Bilstien 5125's,285/75R16 BFG AT's, Trail Gear Rock sliders, Extended differential air lines, custom NISMO stickers, Wet Okole seat covers. http://www.cardomain.com/ride/2600655/1
I was under the assumption that people were getting 3/4"-1" of lift from it, because the control arms angle down, and they are longer, so naturally the hub will be lower. The control arms would have to be parallel to the ground for the height to not be affected at all.
And thread jack... BWarren.. are you getting coil-bucket contact with the stock titan UCA's with the bilsteins and a spacer. I am trying to figure out to go that way, or SAWs and PRG UCA.
__________________ 05 Frontier KC Nismo 4x4. 255/85R16 Maxxis Bighorns, 2.5" PRG lift, 2" DIY Bodylift, Shrockworks Engine, Front/Radiator & Gas Tank skids, WRP Crank Pulley and IMS, Fujita Intake, Slotted Rotors, Custom leaf springs, u-bolt flip. FOR SALE! $15,800 obo 63k miles
Its only made contact one time the entire time I've had it. The stock springs have sagged so I"m getting some 4x4 Nismo springs to replace them, but its got plenty of room to flex... just ask the guys who wheeled w/ me this past weekend
__________________ Third Coast Nissans official page 2005 Nismo CC:Titan Swap'd, Camburg UCA's, Bilstein 5125's, BFG MT's, Shrock sliders, White Rhino light bar, Hella 500's, 2* Adv., Magnaflow exhaust, Airaid intake,
Stillen rotors, Metal Matrix pads, Graphite wheels, Manik TL guards, Kenwood DD HU, Sirius, Infiniti 12 and tweeters, 600w amp, in-channel vent visors, Pfinder switch covers
FUTURE MODS: Wouldn't you like to know!
With just the stock Titan upper and lower control arms you can gain around 3/4" of lift. If you go with PRG titan uppers you can allow for more lift and not worry about coil bucket contact.
yeah im getting the prg titan uppers, but yeah i knew i would get alot more travel but i also knew that stock would get lift out of it, lol so i really hope it lifts about 2 inches
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
