Feeler: My wheels & Titan stufff

[TerribleOne]

Ok, so here's the deal. I would really like to move up to the Titan Mid Travel sooner than later; but I wanted to get an idea of what I may be able to get for the stuff I can't use before I actually start having anything built.


Again, just a feeler; but here's what I am pretty sure I can't use. If you are interested in something let me know what your willing to pay for it.


PRG Titan Uppers - painted gun metal

Stock Titan Lowers - no sway bar mount, painted gun metal

CST Frontier 4" lift spindles modified to run Titan stuff with 6" 2.5's(not sure if I can still use these)

Tie Rod extension

extended SS brake lines

17" ProComp 7089 (possibly with the 33x12.5 ProComp MT's)

m226 axle w/3.54 gearing
c200 axle

[the007forum]

your always tempting me..

[zoomzoom]

How were the spindles modified? Will they still work with the stock Fronty components? I'd be interested in the spindles.

[TerribleOne]

Originally Posted by zoomzoom

How were the spindles modified? Will they still work with the stock Fronty components? I'd be interested in the spindles.

They will still work with any set up you have, but will function properly if you have the Titan stuff. There is an outer lip on the spindle that makes contact with the lower control arms. When you get too much droop travel it can actually blow your lower ball joints by basically prying them apart. With the stock set up you don't have enough travel for it to make contact. But when you move up to the larger coilovers and more travel it can cause some contact and even some damage in my case. I simply ground off the unnecessary lip to clearance them so even at full droop with the Titan swap there is no where near any contact.


Here is some more info and pictures on what I did.
CST spindel w/Titan Swap Ploblem Fixed

[sgthooligan]

I may be interested in the rims. Let me know.

[supernick]

if you plan on getting rid of the spindles i would be interested

[TerribleOne]

What are you guys willing to pay for what your interested in? PM me if you would prefer. Like I said, I am trying to gauge what my out of pocket costs will be after getting rid of the stuff I can't use.

Thanks!