It is used, but it has been refinished in a black texture coat. Looks brand new
__________________
2010 Knight Armor Pro-4X Crew Cab 4x4, 6" Fabtech lift, 2" Body Lift, 34x11.5 Nitto Trail Grapplers, 18x8 Titan Pro4x wheels, 1.5" wheel adapters, HID head lights, Exterra offroad light switch, Pathfinder illuminated steering controls,Bully Dog GT Tuner, Inno bed rack with Thule Big Mouth bike racks, Pioneer AVA-P4300DVD with rear camera, Polk MM 6.5" components front and rear, Polk PA 5 channel amp, Polk MM 10" DVC sub in custom ported box. Custom fiberglass pillars with Polk plates.
I'm interested in 2 lights too I have to take some measurements to see if I can squeeze them behind my grille.
Sent from my T959 using AutoGuide.Com Free App
__________________ 2010 P4X CC: 2.5in/2in Lift (ADF&PRG), Xoskel Bumper Mouth Bracket w/ 4 Rigid Industries Duallys, Superchips Tuned 87 Performance w/WOT Removed, Kool Vue CAI, Rear Axle Vent Mod, Bakflip G2, Radiator bypass, LED conversion.
In Progress: SPC UCA's (in hand) super on the down-low LED light bar project, Cargo light delete, LED courtesy lights, IMS, exhaust, skids, 285's, LED reverse floods Axle Vent Mod & Radiator Bypass South Jersey
__________________
2010 Knight Armor Pro-4X Crew Cab 4x4, 6" Fabtech lift, 2" Body Lift, 34x11.5 Nitto Trail Grapplers, 18x8 Titan Pro4x wheels, 1.5" wheel adapters, HID head lights, Exterra offroad light switch, Pathfinder illuminated steering controls,Bully Dog GT Tuner, Inno bed rack with Thule Big Mouth bike racks, Pioneer AVA-P4300DVD with rear camera, Polk MM 6.5" components front and rear, Polk PA 5 channel amp, Polk MM 10" DVC sub in custom ported box. Custom fiberglass pillars with Polk plates.
__________________
2010 Knight Armor Pro-4X Crew Cab 4x4, 6" Fabtech lift, 2" Body Lift, 34x11.5 Nitto Trail Grapplers, 18x8 Titan Pro4x wheels, 1.5" wheel adapters, HID head lights, Exterra offroad light switch, Pathfinder illuminated steering controls,Bully Dog GT Tuner, Inno bed rack with Thule Big Mouth bike racks, Pioneer AVA-P4300DVD with rear camera, Polk MM 6.5" components front and rear, Polk PA 5 channel amp, Polk MM 10" DVC sub in custom ported box. Custom fiberglass pillars with Polk plates.
__________________
'06 2wd le cc six inches taller, 2"prg spacer front with 4" cst spindles, sway bar removed, 1.5"blocks rear with 2"aal and adj shackles, magnaflow, k & n cai, plastidipped black grille, rattle can bedliner spray on sidestep tubes and most other exterior plastic. 285/70r17 goodyear duratrac tires, superchips tuned, calmini front pre-runner bumper, cobra cb, oem roll up soft tonneau cover, oem bug deflector and vent visors, plasti dip black stock wheels, yakima load warrior roof rack mounted over the tonneau cover, 2" B.O.R.A. wheel adapters in the rear and 1.25" B.O.R.A. adapters int he front[/COLOR]
Just found out from my vendor the HID lights are Rugged Ridge lights.
I will take $300.00 shipped for the setup!
__________________
2010 Knight Armor Pro-4X Crew Cab 4x4, 6" Fabtech lift, 2" Body Lift, 34x11.5 Nitto Trail Grapplers, 18x8 Titan Pro4x wheels, 1.5" wheel adapters, HID head lights, Exterra offroad light switch, Pathfinder illuminated steering controls,Bully Dog GT Tuner, Inno bed rack with Thule Big Mouth bike racks, Pioneer AVA-P4300DVD with rear camera, Polk MM 6.5" components front and rear, Polk PA 5 channel amp, Polk MM 10" DVC sub in custom ported box. Custom fiberglass pillars with Polk plates.
Do you have to have the roof rack to mount this light bar? Ever since I went back to regular bulbs from HID's in my head lights (fire... yeah) I feel like I can't see a damn thing at night. Do you have covers for them by any chance? Around here you can get pulled over for not having them covered.
__________________
2005 CC SE 6MT 4x4 - Avalanche White Titan Swap: S.A.W. Ext Res|M205 Front Diff|Titan Shafts|PRG UCA|PRG TRE|PRG Shackles|Deaver AAL|Bilstein Rear Shocks
4.56 Superior Gears|2" Body Lift|BFGoodrich KM2 M/T 35x12.50-17|17x9 KMC Addicts|AFe CAI|Superchips Tuner
Hefty Fabworks Full Skid Plate Set|Shrockworks Front Bumper and Sliders (Powder-Coated White)
Do you have to have the roof rack to mount this light bar? Ever since I went back to regular bulbs from HID's in my head lights (fire... yeah) I feel like I can't see a damn thing at night. Do you have covers for them by any chance? Around here you can get pulled over for not having them covered.
Yes, you do have to have the roof rack. I have recently sold the lights so all I have left is the rack.
Thanks
Quote:
Originally Posted by Tico SE
will it fit on a 2004 frontier (D22)??
any chance you could ship to Costa Rica?
I dont believe it will fit your truck.
Thanks
__________________
2010 Knight Armor Pro-4X Crew Cab 4x4, 6" Fabtech lift, 2" Body Lift, 34x11.5 Nitto Trail Grapplers, 18x8 Titan Pro4x wheels, 1.5" wheel adapters, HID head lights, Exterra offroad light switch, Pathfinder illuminated steering controls,Bully Dog GT Tuner, Inno bed rack with Thule Big Mouth bike racks, Pioneer AVA-P4300DVD with rear camera, Polk MM 6.5" components front and rear, Polk PA 5 channel amp, Polk MM 10" DVC sub in custom ported box. Custom fiberglass pillars with Polk plates.
Last edited by King Nismo; 12-10-2012 at 12:50 PM.
Reason: Automerged Doublepost
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
