Well, I came home from a deployment in December, and left again in January. Since then, I've ordered a Shrockworks rear bumper with the back-up lights option. An ARB snatch block, tree saver and I think that is it. I'm still searching for a wheel I like, seems like I'll be going with the extremely popular Pro Comp 7089 in black 16s. Not sure if I'll purchase them just yet or not.
__________________
Mods: PRG UCAs, Radflo 2.5 Coilovers, Calmini 5" SL, AC 3" AAL, M226 w/ Locker Swap, 33" Cooper Discoverer STT MTs, NFab Spare Tire Carrier, Superchips Cortex, Flowmaster 40 Series, Custom Y Pipe, Volant CAI, Scangauge II, Pioneer in-dash dvd, Two MTX 10s, Fosgate amp, Garmin Nuvi, UWS Black Diamond Plate Truck Box, Shrock Sliders, Shrock Front bumper, Shrock Rear Bumper, NXRocks T-Case Skid, BTF Diff Cover, PIAAs, Ramsey 9500UT Winch, OEM Fog Lights, Hitch Wiring Harness relocated, Boyo Back Up Camera, Wireless Keypad Entry System, In-channel Visors, Tailgate de-badged, Front Sway Bar Removed, HIDs.
I'm to lazy to go look but what site did you get the switchs from? I did the first thing get the switch panel..
I got the switched from OTRATTW.com or something like that, I believe it's linked somewhere in this thread. They are about $12 a piece. I really dig the switch panel too. I'm glad I did away with the cubby hole.
__________________
Mods: PRG UCAs, Radflo 2.5 Coilovers, Calmini 5" SL, AC 3" AAL, M226 w/ Locker Swap, 33" Cooper Discoverer STT MTs, NFab Spare Tire Carrier, Superchips Cortex, Flowmaster 40 Series, Custom Y Pipe, Volant CAI, Scangauge II, Pioneer in-dash dvd, Two MTX 10s, Fosgate amp, Garmin Nuvi, UWS Black Diamond Plate Truck Box, Shrock Sliders, Shrock Front bumper, Shrock Rear Bumper, NXRocks T-Case Skid, BTF Diff Cover, PIAAs, Ramsey 9500UT Winch, OEM Fog Lights, Hitch Wiring Harness relocated, Boyo Back Up Camera, Wireless Keypad Entry System, In-channel Visors, Tailgate de-badged, Front Sway Bar Removed, HIDs.
I got the switched from OTRATTW.com or something like that, I believe it's linked somewhere in this thread. They are about $12 a piece. I really dig the switch panel too. I'm glad I did away with the cubby hole.
That what I thought but the site doesn't work.. Yeah I'm happy with mine. I have a couple switch I picked up at an electronic store. But one of the them is spring loaded for the winch but I'm taking the winch off and I never wired it up.
The site started acting up a few months back. I couldn't access it from one of the countries I was in, but once I got home it worked. I don't know what the issue was. I just logged into it a minute ago. Are you using Mozilla? If so, try on just Internet explorer.
Pics of the switches: I bought a new 4 slot switch panel to replace my old one (4wd bezel and cubby hole was what I had in mine). And the 4 OTRATTW switches as seen below.
I love those switches! Followed link to site and found them, but can't find the 4 slot switch panel. Where did you get that?
edit - I assume it's the oem one out of a Nismo. Do you have a part number?
__________________ 2006 SE CC 4x4 A/T: NISMO CAI, JBA Exhaust, Unichip PNP, Fabtech 6" Lift w/PRG UCA and Radflo 2.0, ProComp 7089 w/Nitto Terra Grapplers (295/75R16), ShrockWorks Skid Plates and Front bumper w/Warn M8000 and Hella 500s, M226 swap w/ ARB Air Locker and Compressor, UnderCover Tonneau, CW Billet Grilles...
“A government for the people must depend for its success on the intelligence, the morality, the justice, and the interest of the people themselves”. - Grover Cleveland
I don't have the part number handy since I'm overseas. I do have a couple ideas though!
On thenewx.org, I have a build page, I may have included the P/N on that one....I know for sure I put part numbers on that page when things were a PITA to find, I just forgot to do it on this site. If there is no part number there, call Scott at Fontana Nissan, he is the one that helped me find it. The Xterra and the Frontier, although it's the same part, had two different part numbers and I don't know why. He might be able to help. If not, I'll be home next week and I can dig it out of my collection of receipts for you.
__________________
Mods: PRG UCAs, Radflo 2.5 Coilovers, Calmini 5" SL, AC 3" AAL, M226 w/ Locker Swap, 33" Cooper Discoverer STT MTs, NFab Spare Tire Carrier, Superchips Cortex, Flowmaster 40 Series, Custom Y Pipe, Volant CAI, Scangauge II, Pioneer in-dash dvd, Two MTX 10s, Fosgate amp, Garmin Nuvi, UWS Black Diamond Plate Truck Box, Shrock Sliders, Shrock Front bumper, Shrock Rear Bumper, NXRocks T-Case Skid, BTF Diff Cover, PIAAs, Ramsey 9500UT Winch, OEM Fog Lights, Hitch Wiring Harness relocated, Boyo Back Up Camera, Wireless Keypad Entry System, In-channel Visors, Tailgate de-badged, Front Sway Bar Removed, HIDs.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.