|
|
|
|
|||||||
| Register | Home | Forum | Gallery | Active Topics | Register | Search | Today's Posts | Mark Forums Read |
 |
|
|
LinkBack | Thread Tools | Display Modes |
05-21-2008, 06:23 PM
|
||||
|
||||
|
KMC XD 122 Enduro wheels?
My birthday is in August, and my girlfriend has been thinking of some present ideas. Today she something about ProComp Xtreme Alloys (which surprised me, because she shouldn't know what they are), so I started prodding a little and she said she saw a truck today with wheels she liked so she went and took a closer look at them. When I told her they are only about $100 a piece, she was really surprised and asked me if I would like wheels for my b-day, because she liked the idea, but thought they were going to be a lot more $$ than that.
Anyway... It got me looking at wheels. I like the ProComp 7089's:  And KMC XD 122 Enduro's: .jpg) Does anyone have the KMC's? I think they would fit, but I'm not sure, since I know these trucks are hard to get wheels for. The specs are 16x8, 6on4.5, 0-offset, 4.5" backspacing I like both wheels, but I like being a little different, so I like the KMC's more, since I see a lot of ProComps on the road. What do y'all think? A little PS job of the XDs:  
__________________
05 Frontier KC Nismo 4x4. 255/85R16 Maxxis Bighorns, 2.5" PRG lift, Demello Sliders, Shrockworks Engine, Front/Radiator & Gas Tank skids, 15# Ultimate Air CO2, WRP Crank Pulley and IMS, Fujita Intake, Slotted Rotors/EBC Pads, Braided Brake Lines, WRF Lightbar with HID converted Hella 500s. In the works: Custom re-built leaf springs, custom rear diff cover, u-bolt flip. 
|
| Sponsored Links | ||
| ||
|
|
|
05-21-2008, 06:56 PM
|
||||
|
||||
|
Go for the kmc's they're bad@ss!!!
|
|
05-21-2008, 07:01 PM
|
||||
|
||||
|
Don't get the KMC's!
I was going to get them...
__________________
2005 NISMO CC-AC 2.5" front coils,AC 3 leaf pack,Bilstein, shocks 3" BL, Titan front differential, Pathfinder half shafts, 285/75R16 BFG KO, Cragar soft 8 steel rims, Shrockworks sliders and skids  Nissan Offroad Association of the Southeast
|
|
05-21-2008, 07:19 PM
|
||||
|
||||
|
I would go with the procom's
__________________
2003 CREW CAB T-Bar crank with shackles, 2 inch body lift, LEER camper top, American Racing 767 with 31x10.5x15 Remington mud brute, Midland CB Radio with Wilson "Little Wil" Antenna, Jensen CD/DVD touchscreen, Kicker KX 700.1 AMP, 2 8 inch Kicker Solo-Baric L5, Performance Headers, WRP grounding kit, bilstein 5125 Future Mods Add A Leaf, Revolver Shackles Rick  http://www.corridorwatch.org/ttc/index.htm
|
|
05-21-2008, 07:24 PM
|
||||
|
||||
|
get the kmc's
__________________
|
|
05-21-2008, 08:44 PM
|
||||
|
||||
|
Quote:
__________________
Cokeman 08 Frontier KC XE 2wd 4cyl 5 speed 6 Inch front suspension: 4 inch CST spindles, 2 inch PRG spacers, Procomp brake lines. 4 1/2 Inch rear suspension: 2 inch Deavers, PRG 1.5 inch block and PRG 2 inch shackle set to 1 inch, Bilstien 5125s. 17x8 American Eagle wheels, 285 70 17 BFG AT's, Hidden Hitch, Extang cover, XM, Kaption Audio tweeters, Garmin GPS, Tint UPDATED PICS OF MY TRUCK
|
|
05-21-2008, 09:03 PM
|
||||
|
||||
|
Buy the KMC enduro's...you don't want to be like everyone else and their mother do you?
The KMC's are going to cost more, and I am not sure if they have enough offset to clear the calipers with a 16" wheel. I know for sure the ProComp's 16" will fit fine and have a better offset to stick the wheels out a little more. The other thing I like about the ProComp's is how large the lip is, it prevents some damage while offroading. The enduro's really don't have a lip, so you may end up with some damage to the face of the wheel. Just my opinion on the matter. I have had the 7089's for a while now and they are, in my opinion, the best wheel we can get for the frontiers without adapters. However, if we had the 6x5.5 pattern I would have never even considered either of those wheels.
|
|
05-22-2008, 06:51 PM
|
||||
|
||||
|
Quote:
__________________
2005 NISMO CC-AC 2.5" front coils,AC 3 leaf pack,Bilstein, shocks 3" BL, Titan front differential, Pathfinder half shafts, 285/75R16 BFG KO, Cragar soft 8 steel rims, Shrockworks sliders and skids Nissan Offroad Association of the Southeast
|
|
05-22-2008, 11:17 PM
|
||||
|
||||
|
Quote:
__________________
Cokeman 08 Frontier KC XE 2wd 4cyl 5 speed 6 Inch front suspension: 4 inch CST spindles, 2 inch PRG spacers, Procomp brake lines. 4 1/2 Inch rear suspension: 2 inch Deavers, PRG 1.5 inch block and PRG 2 inch shackle set to 1 inch, Bilstien 5125s. 17x8 American Eagle wheels, 285 70 17 BFG AT's, Hidden Hitch, Extang cover, XM, Kaption Audio tweeters, Garmin GPS, Tint UPDATED PICS OF MY TRUCK
|
| Sponsored Links | ||
| ||
|
|
Linear Mode
