I want to get a winch for my truck. im not too heavy in to off roading, but I do like it a lot! should I get a receiver and a mount and put my winch on that. also if I do go with the front reciver is there any way to make it less noticable(when I dont have the winch on it). or should I just get the Nissan Frontier Winch Bumper.
i'm not a fan of the front receiver winch mount because you loose so much approach angle with it up there. Now if you were to get a Shrockworks front bumper with built in receiver that would work, since it's much higher. I like the versatility of being able to winch from the front and the back. I can't afford either way, so i guess it doesn't matter!
__________________
Ryan
2008 CC Nismo 4x4
Superchips Cortex, K&N drop in, 3" spacer/shackle lift, 2" body lift, 285/75/16 Kumho MT KL71's, custom sliders, NXRocks skid plates (ordered!), WRP Crank Pulley
i'm not a fan of the front receiver winch mount because you loose so much approach angle with it up there. Now if you were to get a Shrockworks front bumper with built in receiver that would work, since it's much higher. I like the versatility of being able to winch from the front and the back. I can't afford either way, so i guess it doesn't matter!
what do you mean "winch from the front and the back" ? i didnt know you could do that with that bumper.
lol ya. when you said that you could move it to the rear you were talking about the hitch winch, weren't you? i thought you ment that the shocksworks winch bumper could go from the front to the rear, lol
well I have the front receiver hitch with a winch mounted on it and it has worked fine for me. I have used it to do a variety of things so it has come in quite handy. But you definitely loose aproach angle and it has taken a beating out in front of my truck, but it has served it's purpose and will be replaced with a shrockworks bumper as soon as it arrives.
__________________ 2006 SE CC 4x4 A/T: NISMO CAI, JBA Exhaust, Unichip PNP, Fabtech 6" Lift w/PRG UCA and Radflo 2.0, ProComp 7089 w/Nitto Terra Grapplers (295/75R16), ShrockWorks Skid Plates and Front bumper w/Warn M8000 and Hella 500s, M226 swap w/ ARB Air Locker and Compressor, UnderCover Tonneau, CW Billet Grilles...
“A government for the people must depend for its success on the intelligence, the morality, the justice, and the interest of the people themselves”. - Grover Cleveland
well I have the front receiver hitch with a winch mounted on it and it has worked fine for me. I have used it to do a variety of things so it has come in quite handy. But you definitely loose aproach angle and it has taken a beating out in front of my truck, but it has served it's purpose and will be replaced with a shrockworks bumper as soon as it arrives.
how did it take a beating out on the front of your truck?
how did it take a beating out on the front of your truck?
Well it's the first thing to enter every mud puddle and hit every rock when offroad. It has survived and the winch continues to function, but it can carry 10 lbs of carolina clay i assure you of that.
__________________ 2006 SE CC 4x4 A/T: NISMO CAI, JBA Exhaust, Unichip PNP, Fabtech 6" Lift w/PRG UCA and Radflo 2.0, ProComp 7089 w/Nitto Terra Grapplers (295/75R16), ShrockWorks Skid Plates and Front bumper w/Warn M8000 and Hella 500s, M226 swap w/ ARB Air Locker and Compressor, UnderCover Tonneau, CW Billet Grilles...
“A government for the people must depend for its success on the intelligence, the morality, the justice, and the interest of the people themselves”. - Grover Cleveland
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
