[shaggyusm]

Originally Posted by soccerbrace

Take a very small needle and insert it into the sprayer hole. You can aim where it goes this way. IF there is a clog this could remove it as well.

Or, you can get a clay bar, and mold it into a donut around the sprayer. When you have it like that, you just made a "cup, and you can pour simple green in there and it will saturate in there and possibly dissolve the clog.

There's no clog. It sprays fine on the windshield. It just also spray sprays straight up. NOT from the sprayer nozzle though. It sprays from the sprayer housing seam. The horizontal top of the housing is where it comes from. I thought about just smearing some black caulk into the seams and seeing if that works. But it's on both sprayers like that. I really need to post a pic of what I'm talking about. Here's a crude representation.

"Retarded" stream coming from here (that's an arrow pointing down):
.................................................. .................................................. ...|
.................................................. .................................................. ...\/
.................................................. ................................................__ _______
Sprayer ----->................................................. ............................|..............|
.................................................. ..............................................|... ............@ <---Nozzle
.................................................. .............................................|.... ............|
.................................................. ............................................|................ |