|
Install Guide: Garmin Nuvi 750 w/Nissan docking unit
Installed my Garmin Nuvi 750 tonight, took maybe 30 min. Thought I would share to show how simple the install is.
Step 1: gently pry off top tray
2. unscrew radio bezel
3. Gently pull off the radio bezel
4. remove the (4) screws attached to the radio brackets
5. Identify the larger main radio harness and unplug
6. Identify the green/black stripe wire (on non-CD changer unit only)
7. Insert green/black wire into grey cap from the tap
8. Unplug harness on the docking unit, insert red wire from harness into red end of the tap and screw onto grey cap (previously attached to radio harness)
9. Plug radio harness back into radio and reinstall into dash. While reattaching radio brackets to dash ground black wire from the docking unit onto radio bracket.
10. Reattach radio bezel, while pulling docking harness through the hole ontop of the bezel as shown.
11. Attach rubber strap from the docking unit using the screw that attaches the radio bezel.
12. Plug-in docking unit harness
13. Line up tabs and gently install the docking unit
14. Open unit and install Garmin Nuvi 750
Finished product illuminated:
Last edited by WestCo Justin : 01-31-2008 at 01:34 PM.
|
