|
1. Programming Procedure:
A. Get in the vehicle. Close and lock all doors using the driver's power door lock-unlock switch.
AA. PUSH BRAKE PEDAL DOWN.
B. Insert and remove the ignition key more than 6 times within a 10 second period (at a rate of one insertion/removal cycle per second). The key should be withdrawn from the ignition key cylinder completely each time it is removed.
Only thing I did differently on mine was push the brake in after the doors locked.
__________________
'05 4X4 Storm Gray CC
JBA Cat-Back, Injen Power Flow Intake, Shrockworks sliders, other stuff in the works.
'02 4X4 Super Black Xterra
Nismo CAI, Nismo Cat-Back, Shrockworks skids and sliders.
|
